Comac - Leonardo 5H

Comac - Leonardo 5H

Price request

Technical details

  • Rounds1000 mm
  • Squares1200 mm
  • Flats800 mm
  • Flats on edge1500 mm
  • Angles1000 mm
  • (1) horizontal / (2) vertical1  

COMAC HORIZONTAL HYDRAULIC SECTION BENDERS

Model:        Leonardo 5H
Serial No:   500217
MFD:          2007

Capacities:
Flats on Edge:                 80 x 8mm min 800mm ID
                                      25 x 8mm min 200mm ID
Flats:                              120 x 20mm min 800mm ID
                                      30 x 10mm min 240mm ID
Square Section:              40 x 40mm min 1200mm ID
                                      15 x 15mm min 200mm ID
Rounds:                         45mm dia min 1000mm ID
                                      25mm dia min 300mm ID
Tube:                             80 x 2.5mm min 2000mm ID
                                      20 x 2mm min 200mm ID
                                      60.3 x 4.4mm min 800mm ID
                                      26.9 x 2.9mm min 300mm ID
Box on Edge:                  60 x 30 x 4mm min 1500mm ID
                                      40 x 20 x 3mm min 800mm ID
                                      60 x 60 x 3mm min 3000mm ID
                                      20 x 20 x 2mm min 400mm ID
Angle Toe Out:               60 x 6mm min 600mm ID
                                      25 x 3mm min 400mm ID
Angle Toe In:                 60 x 6mm min 1000mm ID
                                      25 x 3mm min 600mm ID
T Section Toe Out:           60 x 60 x 7mm min 600mm ID
                                      20 x 20 x 3mm min 200mm ID
T Section Toe In:            60 x 60 x 7mm min 700mm ID
                                      20 x 20 x 3mm min 200mm ID
T Section on Edge:           70 x 70 x 8mm min 600mm ID
                                      20 x 20 x 3mm min 200mm ID
Chanel Toe Out:              80 x 45mm min 600mm ID
                                      30 x 15mm min 300mm ID
Chanel Toe In:                80 x 45mm min 600mm ID
                                      30 x 15mm min 300mm ID

Shaft Diameter:              50mm
Roll Diameter:                175mm
Rolling Speed:                4.4m/min

Electrics:    415v, 3ph, 50 Cycles
Motor:        1.5kw

Complete With:
1 Set Of Section Formers
1 Set Of Tube Formers
Pendent Control

Approximate Dimensions: 1200 x 800 x 1350mm
Approximate Weight:       495kg

Dealer: NORTHERN MACHINE TOOLS (ENGINEERING) LTD

NORTHERN MACHINE TOOLS (ENGINEERING) LTD
Price request